Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Dismounting and Remounting

Generator

Dismounting

1. Disconnect negative (-) cable at battery.
2. Disconnect generator lead wire ("B" terminal wire) and coupler from generator.
3. Remove generator belt. Refer to "Cooling Fan / Generator Belt Removal and Installation: G16 Engine" or "Cooling Fan / Generator Belt Removal and Installation: J20 Engine".
4. Remove generator drive belt adjusting bolt and generator mounting bolt.
5. Remove generator.

Remounting
1. Mount generator on the generator bracket.
2. Tighten generator bolts (upper bolt (short) (1), lower bolt (long) (2)).

Tightening torque
Generator mounting bolt (a): 23 N.m (2.3 kg-m, 17.0 lb-ft)

3. Install generator (cooling fan) belt. Refer to "Cooling Fan / Generator Belt Removal and Installation: G16 Engine".
4. Install cooling fan belt (J20 engine only). Refer to "Cooling Fan / Generator Belt Removal and Installation: J20 Engine".




5. Connect "B" terminal wire (3) and coupler to generator.

Tightening torque
"B" terminal outer nut (b): 8 N.m (0.8 kg-m, 6.0 lb-ft)

6. Install canister.
7. Connect negative (-) cable at battery.