Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2006 >> Aerio L4-2.3L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Cooling System >> Engine - Coolant Temperature Sensor/Switch >> Engine Temperature Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Temperature Sensor: Service and Repair

Engine Coolant Temperature Sensor Removal and Replacement

Removal
1. Disconnect negative cable from battery.
2. Drain coolant.





3. Disconnect connector from ECT sensor (1).
4. Remove ECT sensor from water outlet pipe.

Installation





Reverse removal procedure noting the following.
- Clean mating surfaces of sensor and water outlet pipe.
- Tighten ECT sensor (1) to specified torque.
Tightening torque
ECT sensor (a): 13 Nm (1.3 kgf-m, 9.5 ft. lbs.)
- Connect connector to sensor securely.
- Refill cooling system.

pro multis · About Operation CHARM