Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2006 >> Aerio L4-2.3L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Throttle Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Throttle Position Sensor: Service and Repair

Throttle Position (TP) Sensor Removal and Installation

Reference: Throttle Position (TP) Sensor On-Vehicle Inspection

Removal
1. Disconnect battery negative cable at battery.
2. Disconnect coupler from TP sensor.
3. Remove TP sensor from throttle body.

Installation
1. Install TP sensor (1) to throttle body (2).
Fit TP sensor (1) to throttle body (2) in such way that its holes are a little away from TP sensor screw holes as shown in the figure and turn TP sensor (1) clockwise so that those holes align.




2. Tighten TP sensor screw to specified torque.

Tightening torque
TP sensor screw a: 2.5 N.m (0.25 kg-m, 1.8 lb-ft)

3. Connect coupler to TP sensor securely.
4. Connect battery negative cable to battery.
pro multis · About Operation CHARM