Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Spark Test

Ignition Spark Test
1. Remove engine cover from cylinder head cover referring to Engine Cover Removal and Installation.
2. Disconnect injector harness coupler.

WARNING: Without disconnection of injector coupler, combustible gas may come out from spark plug holes during this test and may get ignited in engine room.

3. Remove ignition coil referring to Ignition Coil Assembly (Igniter and Ignition Coil) Removal and Installation.
4. Remove spark plug referring to Spark Plug Removal and Installation.
5. Connect ignition coil coupler to ignition coil and connect spark plug to ignition coil.
6. Ground spark plug to engine securely.




7. Crank engine and check if spark plug sparks.
8. If no spark is emitted, inspect spark plug, ignition coil, CMP sensor, igniter, etc.
9. Install spark plug referring to Spark Plug Removal and Installation.
10. Install ignition coil referring to Ignition Coil Assembly (Igniter and Ignition Coil) Removal and Installation.
11. Connect injector harness coupler.
12. Install engine cover to cylinder head cover referring to Engine Cover Removal and Installation.