Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2006 >> Aerio L4-2.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Differential Assembly >> Service and Repair >> Rear Mounting Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Mounting Removal and Installation

Rear Differential Rear Mounting Removal and Installation
Removal
1. Hoist vehicle.





2. Remove stabilizer bar mount bolt (1) and stabilizer bar bracket (2) installed on right side of vehicle.





3. Place jack (1) under rear differential.
4. Remove mounting bracket bolts (2), mounting bolts (3) and differential rear mounting (4).





5. Drive mountings out with special tools and hydraulic press (1).
Special Tool
(C): 09951-16080
(D): 09951-26020

Installation





1. Press mountings (1) in rear mounting bracket (2) by using special tools and hydraulic press (3) with caring its installation position shown in figure.
Special Tool
(C): 09951-16080
(D): 09951-26020





2. Install differential rear mounting (4), and tighten mounting bracket bolts (5) and mounting bolts (6) to specified torque.
Tightening torque
Differential front mounting bracket bolts (a): 50 Nm (5.0 kgf-cm, 36.5 ft. lbs.)
Differential front mounting bolt (b): 80 Nm (8.0 kgf-cm, 58.0 ft. lbs.)





3. Install stabilizer bar bracket (1) and tighten stabilizer bar mount bolt (2) to specified torque.
Tightening torque
Stabilizer bar mount bolt (a): 23 Nm (2.3 kgf-cm, 17.0 ft. lbs.)



pro multis · About Operation CHARM