Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2006 >> XL-7 2WD V6-2.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Front Wheel Speed Sensor Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Wheel Speed Sensor Removal and Installation

Front Wheel Speed Sensor Removal and Installation

Removal

Reference: Front Wheel Speed Sensor Output Voltage Inspection
1) Disconnect negative cable from battery.
2) Hoist vehicle and remove wheel.
3) Disconnect front wheel speed sensor connector (1).





4) Remove harness clamp and sensor bolts (2) and remove front wheel speed sensor (1) from knuckle.

CAUTION:
^ Do not pull wire harness when removing front wheel speed sensor.
^ Do not cause damage to surface of front wheel speed sensor and do not allow dust, etc. to enter its installation hole.





Installation

Reference: Front Wheel Speed Sensor Inspection
1) Check sensor rotor referring to Front Wheel Speed Sensor Rotor On-Vehicle Inspection.
2) Install it by reversing removal procedure.

CAUTION:
^ Do not pull wire harness or twist more than necessary when installing front wheel speed sensor (1).
^ Fit harness grommet to inner fender securely.

Tightening torque
Front wheel speed sensor harness clamp bolt a: 10 Nm (1.0 kg-m, 7.5 ft. lbs.)

Front wheel speed sensor bolt b: 23 Nm (2.3 kg-m, 17.0 ft. lbs.)





3) Check that there is no clearance between sensor (1) and knuckle.




pro multis · About Operation CHARM