A/T Fluid Change

A/T Fluid Change
1. Lift up vehicle.
2. When engine is cool, remove drain plug from oil pan and drain A/T fluid using oil gutter (1).
3. Install drain plug.





4. Lower vehicle and fill proper amount of specified fluid.
5. Check fluid level referring to At Normal Operating Temperature under A/T Fluid Level Check.

A/T fluid specification
Equivalent of DEXRON-III

A/T fluid capacity reference value
When draining from drain plug hole: Approximately 3.0 liters (6.34/5.28 US/Imp. pt.)
When overhauling: Approximately 10.3 liters (21.76/18.13 US/Imp. pt.)