Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2007 >> Grand Vitara 2WD V6-2.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Shift Linkage >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Shift Linkage: Service and Repair

Transmission Shift Control Lever Removal and Installation
Removal
1. Remove front console box.
2. Lift up boot cover (1), boot (2) and sheet (3).
3. Remove case cover (4) and take out shift control lever (5) from gear shift lever rear case (6).





Installation

1. Tighten new control lever locating bolts (1) to specified torque, if removed.

Tightening torque
Control lever locating bolt a: 10 Nm (1.0 kg-m, 7.5 ft. lbs.)

2. Apply grease to pivot portions and seat, then install shift control lever.

A: Grease 99000-25010SUZUKI Super Grease A ()





3. Set shift control lever (2) to gear shift lever rear case.
4. Install case cover (1) to gear shift lever rear case (3). Tighten case cover bolt to specified torque.





5. Install sheet, boot (1) with boot cover (2) to floor panel.

Tightening torque
Control lever boot cover bolt a: 12 Nm (1.2 kg-m, 9.0 ft. lbs.)





6. Install front console box.
pro multis · About Operation CHARM