Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Equator 4WD V6-4.0L >> Repair and Diagnosis >> Heating and Air Conditioning >> Evaporator Temperature Sensor / Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Evaporator Temperature Sensor / Switch: Service and Repair




Intake Sensor: Removal and Installation

Removal

1) Remove the lower dash side finisher. Refer to [Instrument Panel Assembly: Exploded View] Instrument Panel Assembly Exploded View.
2) Remove the assist grip handle. Refer to [Body Side Trim: Component] Body Side Trim Component.
3) Remove the front pillar upper finisher. Refer to [Body Side Trim: Removal and Installation] Body Side Trim Removal and Installation.
4) Remove the upper glove box (cluster lid E). Refer to [Instrument Panel Assembly: Exploded View] Instrument Panel Assembly Exploded View.
5) Disconnect the intake sensor electrical connector.






NOTE:
The intake sensor is located on the top of the heater and cooling unit assembly next to the A/C evaporator cover.

6) Twist the intake sensor to remove the intake sensor from the heater and cooling unit assembly.

Installation

Installation is in the reverse order of removal.

pro multis · About Operation CHARM