Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Equator 4WD V6-4.0L >> Repair and Diagnosis >> Lighting and Horns >> Headlamp >> Service and Repair >> Removal and Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement




Headlamp: Removal and Installation

Front Combination Lamp

Removal

1) Position front fender protector aside. Refer to [Front Fender Protector: Removal and Installation] Front Fender Protector Removal and Installation.
2) For steel bumper, remove the front bumper upper valance. Refer to [Front Bumper: Removal and Installation] Service and Repair.
3) For plastic bumper, remove the front bumper assembly. Refer to [Front Bumper: Removal and Installation] Service and Repair.
4) Remove the front combination lamp bolts.
5) Disconnect the front combination lamp connector and remove front combination lamp.

Installation

Installation is in the reverse order of removal.

NOTE:

After installation, perform headlamp aiming adjustment. Refer to [Headlamp: Aiming Adjustment] Adjustments.





pro multis · About Operation CHARM