Key Interlock Cable Removal and Installation

Key Interlock Cable: Removal and Installation

Removal

1) Remove the A/T finisher. Refer to [Center Console Assembly: Exploded View] Center Console Assembly Exploded View.
2) Remove the lower glove box. Refer to [Upper Glove Box: Removal and Installation] Upper Glove Box.
3) Remove instrument lower panel LH. Refer to [Instrument Lower Panel LH: Removal and Installation] Instrument Lower Panel LH.
4) Unlock slider from adjuster holder by squeezing lock tabs.





5) Remove casing cap from bracket of shift selector assembly and remove interlock rod from adjuster holder.
6) Remove holder from key cylinder and remove key interlock cable.






Installation

1) Set key interlock cable to key cylinder and install holder.





2) Set shift selector handle to "P" position.
3) Turn ignition key to "LOCK" position.
4) Insert key interlock rod (A) into adjuster holder (B).





5) Install casing cap (C) to bracket (D).
6) Move slider (E) toward key interlock rod (A) to secure adjuster holder (B) to key interlock rod (A).
7) Install instrument lower panel LH. Refer to [Instrument Panel Assembly: Exploded View] Instrument Panel Assembly Exploded View.
8) Install lower glove box. Refer to [Instrument Panel Assembly: Exploded View] Instrument Panel Assembly Exploded View.
9) Install A/T finisher. Refer to [Instrument Panel Assembly: Exploded View] Instrument Panel Assembly Exploded View.