Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Grand Vitara 4WD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair >> CKP (Crankshaft Position) Sensor Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

CKP (Crankshaft Position) Sensor Removal and Installation




CKP (Crankshaft Position) Sensor Removal and Installation

CKP (Crankshaft Position) Sensor On-Vehicle Inspection

Removal

1) Disconnect negative cable from battery.
2) Remove generator. Generator Removal and Installation
3) Disconnect connector from CKP sensor.
4) Remove CKP sensor (1) from cylinder block (2).

Installation

CKP (Crankshaft Position) Sensor Inspection

Reverse removal procedure noting the following.

- Apply engine oil to O-ring of sensor.

NOTE:
The CKP sensor bolt is pre-coated with adhesive.

If the bolt is reused, it may work loose. Be sure to replace the CKP sensor bolt with a new one it is loosened.

- Tighten CKP sensor bolt to specified torque.

Tightening torque
CKP sensor bolt 11 Nm (1.1 kgf-m, 8.5 lbf-ft)









- Connect connector and fix wire harness with clamp securely.

pro multis · About Operation CHARM