Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Grand Vitara 4WD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Testing and Inspection >> HO2S (Heated Oxygen Sensor) On-Vehicle Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

HO2S (Heated Oxygen Sensor) On-Vehicle Inspection




HO2S (Heated Oxygen Sensor) On-Vehicle Inspection

A/F (Air Fuel Ratio) Sensor, HO2S (Heated Oxygen Sensor) Removal and Installation

HO2S heater

1) Turn off ignition switch and disconnect HO2S connector.
2) Check that voltage of HO2S connector (vehicle side) between terminals "4" and "3" is battery voltage when ignition switch is in ON position.

If faulty condition is found, check power supply circuit, ground circuit and connections.





3) Using ohmmeter, measure resistance of HO2S connector (sensor side) of sensor heater between terminals "3" and "4" at sensor connector.

If faulty condition is found, replace HO2S. Service and Repair

NOTE:
Sensor temperature affects resistance value largely. Make sure that sensor heater is at specified temperature.

HO2S heater resistance
5.0 - 6.4 ohms at 20 °C (68 °F)









pro multis · About Operation CHARM