Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Grand Vitara 4WD L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair >> Output Shaft Speed Sensor Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Output Shaft Speed Sensor Removal and Installation




Output Shaft Speed Sensor Removal and Installation

Removal

1) Disconnect negative cable at battery.
2) Hoist vehicle.
3) Disconnect output shaft speed sensor connector.
4) Remove output shaft speed sensor (1) from transmission.






Installation

1) Check that sensor is free from any metal particles and damage.
2) Apply A/T fluid to new O-ring and then install output shaft speed sensor (1) to transmission.

Tighten sensor bolt to specified torque.

Tightening torque
Output shaft speed sensor bolt (a): 7 Nm (0.7 kgf-m, 5.0 lbf-ft)





3) Connect output shaft speed sensor connector.
4) Lower hoist.
5) Connect negative cable at battery.

pro multis · About Operation CHARM