Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Kizashi AWD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Service and Repair >> Knock Sensor Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor Removal and Installation




Knock Sensor Removal and Installation

Removal

1) Disconnect negative (-) cable at battery.
2) Remove generator. Generator Removal and Installation
3) Disconnect knock sensor connector.
4) Remove knock sensor (1) from cylinder block.

Installation

Reverse removal procedure, noting the following points:

- Install knock sensor (1) as shown in figure.
- Tighten knock sensor bolt (2) to specified torque.

Tightening torque
Knock sensor bolt (a): 25 Nm (2.5 kgf-m, 18.5 lbf-ft)










pro multis · About Operation CHARM