Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Kizashi FWD L4-2.4L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Testing and Inspection >> Programming and Relearning
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Programming and Relearning




Procedure after ECM Replacement

NOTE:

When ECM and keyless start control module are replaced with new ones at the same time, perform "Immobilizer Key Registration" instead of "ECM Registration" using SUZUKI scan tool and immobilizer cable. Refer to "SUZUKI SDT Immobilizer Control System Operator's Manual" for the immobilizer registration.

After ECM is replaced with new one, perform the following procedures:
1) Program calibration data to ECM. Refer to "Suzuki ECU Programming System Operator's Manual".
2) Register VIN data to ECM. VIN Registration
3) Perform "ECM Registration". Programming and Relearning
4) Perform electric throttle control system calibration. Testing and Inspection
pro multis · About Operation CHARM