Removal

2UZ-FE ENGINE MECHANICAL: ENGINE UNIT: REMOVAL

REMOVAL

1. REMOVE NO. 2 AIR HOSE Removal
2. REMOVE AIR SWITCHING VALVE ASSEMBLY (for Bank 1) Removal
3. REMOVE AIR SWITCHING VALVE ASSEMBLY (for Bank 2) Removal
4. REMOVE IGNITION COIL ASSEMBLY Removal
5. REMOVE VACUUM HOSE ASSEMBLY Removal
6. REMOVE NO. 2 WATER BY-PASS PIPE Removal
7. REMOVE INTAKE MANIFOLD Removal
8. REMOVE AIR TUBE





(a) Remove the 3 bolts, air tube and gasket.
9. REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY Removal
10. REMOVE NO. 4 AIR INJECTION SYSTEM HOSE
11. REMOVE AIR PUMP ASSEMBLY Removal
12. REMOVE STARTER ASSEMBLY Removal
13. REMOVE WATER INLET HOUSING Removal
14. REMOVE FRONT WATER BY-PASS JOINT Removal
15. REMOVE REAR WATER BY-PASS JOINT Removal
16. REMOVE OIL COOLER PIPE Removal
17. REMOVE NO. 2 WIRING HARNESS HEAT INSULATOR





(a) Remove the 2 bolts and heat insulator.
18. REMOVE FRONT ENGINE MOUNTING INSULATOR RH





(a) Remove the nut and mounting insulator.
19. REMOVE FRONT ENGINE MOUNTING INSULATOR LH





(a) Remove the nut and mounting insulator.
20. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH





(a) Remove the 4 bolts and mounting bracket.
21. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH





(a) Remove the 4 bolts and mounting bracket.
22. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2) Removal
23. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1) Removal
24. REMOVE VVT SENSOR Removal
25. REMOVE KNOCK CONTROL SENSOR Removal
26. REMOVE CRANKSHAFT POSITION SENSOR Removal
27. REMOVE VENTILATION VALVE SUB-ASSEMBLY Removal