Rear Seat
DISASSEMBLY1. REMOVE SEATBACK LOCK KNOBS
2. REMOVE SEATBACK LOCK KNOB HOLDERS
3. REMOVE SEATBACK FRAME
a. Using a clip remover, remove the 5 clips.
b. Turn over the seatback cover, then remove the hog rings.
c. Remove the seatback frame from the seatback cover with pad.
d. Employ the same manner described above to the other side.
4. REMOVE SEATBACK LOCK
a. Remove the 2 bolts and seatback lock.
b. Employ the same manner described above to the other side.
5. REMOVE SEATBACK COVER
a. Remove the hog rings and seatback cover from the seatback pad.
b. Employ the same manner described above to the other side.
6. REMOVE SEATBACK CUSHION COVER
Remove the hog rings and seat cushion cover from the seat cushion frame with pad.
REASSEMBLY
1. INSTALL SEAT CUSHION COVER
Install the seat cushion cover with new hog ring to the seat cushion frame with pad.
HINT: When installing hog rings, take care to prevent wrinkles as little as possible.
2. INSTALL SEATBACK COVER
a. Install the seatback cover with new hog ring to the seatback pad.
HINT: When installing hog rings, take care to prevent wrinkles as little as possible.
b. Employ the same manner described above to the other side.
3. INSTALL SEATBACK LOCKS
Torque: 21 N.m (210 kgf.cm, 15 ft.lbf)
4. INSTALL SEATBACK FRAME
a. Install the seatback frame to the seatback cover with pad.
b. Install new hog rings.
HINT: When installing hog rings, take care to prevent wrinkles as little as possible.
c. Install the 5 clips.
d. Employ the same manner described above to the other side.
5. INSTALL SEATBACK LOCK KNOB HOLDERS
6. INSTALL SEATBACK LOCK KNOB