Brakes - Rear Brake Pad Installation
BRAKESBR005-05
Title:
REAR DISC BRAKE PAD INSTALLATION
Models:
'00 - '05 Celica, '03 - '05 Matrix, &
'04 - '05 Corolla
August 4, 2005
Introduction
The procedure outlined in this bulletin is being provided as a service tip for the replacement of rear brake pads and retaining clip.
For complete details on brake pad replacement and caliper service, refer to the Technical Information System (TIS), applicable model year vehicle Repair Manual.
Applicable Vehicles
^ 2000 - 2005 model year Celica vehicles.
^ 2003 - 2005 model year Matrix vehicles.
^ 2004 - 2005 model year Corolla vehicles.
Components
Warranty Information
Repair Procedure
1. Install the brake pads.
A. Install the two brake pads with the anti-squeal shims to the brake caliper.
B. Install the two (2) guide pins to fix the brake pads.
2. Install spring No. 1.
A. Hook the spring upper portion to guide pin No. 1.
B. Hook the spring lower portion to the center hole of the brake pad.
3. Install spring No. 2.
A. Hook the spring upper portion to guide pin No. 1.
B. Hook the spring lower portion to the center hole of the brake pad.