Headlamp: Service and Repair
REMOVAL1. REMOVE UPPER FRONT FENDER APRON SEAL
2. REMOVE UPPER RADIATOR SUPPORT SEAL
3. REMOVE FRONT BUMPER COVER
4. REMOVE HEADLIGHT
a. Remove the 3 bolts.
b. Disconnect the connectors, then remove the headlight as shown in the illustration.
c. The procedure for the other side is same as above.
HINT: At the time of installation, if the bracket in the illustration is damaged, replace it to a new one to install the headlight to the body.
If the shown part of the headlight is damaged, the headlight can be reinstalled to the body by installing a bracket to it.
INSTALLATION
Installation is in the reverse order of removal