Coolant Temperature Sensor/Switch (For Computer): Testing and Inspection
INSPECTION1. DRAIN ENGINE COOLANT
2. REMOVE N0.2 CYLINDER HEAD COVER
3. REMOVE ECT SENSOR
4. INSPECT ECT SENSOR RESISTANCE
Using an ohmmeter, measure the resistance between terminals 1 (E2) and 2(THW).
Resistance: Refer to the graph
If the resistance is not as specified, replace the ECT sensor.
5. REINSTALL ECT SENSOR
Install a new gasket to the ECT sensor.
6. REINSTALL N0.2 CYLINDER HEAD COVER
7. FILL RADIATOR WITH ENGINE COOLANT