Rear
REPLACEMENT1. REMOVE REAR WHEEL
2. w/ Disc brake: REMOVE BRAKE CALIPER AND DISC
a. Remove the 2 bolts, brake caliper and disc.
b. Support the brake caliper securely.
3. w/ Drum brake: REMOVE BRAKE DRUM
4. REMOVE HUB BOLT
Using SST and a brass bar, remove the hub bolt.
SST 09628-10011
5. INSTALL HUB BOLT
a. Install a washer and nut to a new hub bolt as shown in the illustration.
b. Using a brass bar to hold, install the hub bolt by torquing the nut.
6. w/ Drum brake: INSTALL BRAKE DRUM
7. w/ Disc brake: INSTALL DISC AND BRAKE CALIPER
Install the disc and brake caliper and 2 bolts.
Torque: 47 Nm (475 kgf-cm, 34 ft. lbs.)
8. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)