Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2003 >> Highlander 2WD V6-3.0L (1MZ-FE) >> Repair and Diagnosis >> Maintenance >> Filters >> Oil Filter >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Filter: Service and Repair

REPLACEMENT
1. REMOVE ENGINE UNDER COVER NO.1





2. REMOVE OIL FILTER SUB-ASSY
a. Using SST, remove the oil filter.
SST 09228-07501





3. INSTALL OIL FILTER SUB-ASSY
a. Check and clean the oil filter installation surface.
b. Apply clean engine oil to the gasket of a new oil filter.
c. Lightly screw the oil filter into place, and tighten it until the gasket contacts the seat.
d. Using SST, tighten it an additional 3/4 turn.
SST 09228-07501
4. ADD ENGINE OIL
5. INSPECT OIL LEAK
pro multis · About Operation CHARM