Variable Valve Timing Solenoid: Service and Repair

Camshaft Timing Oil Control Valve:

REMOVAL




1. REMOVE AIR CLEANER ASSEMBLY




2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE
a. Disconnect the oil control valve connector.
b. Remove the bolt, oil control valve and O-ring.

INSPECTION







INSPECT CAMSHAFT OIL CONTROL VALVE OPERATION
Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 2, and check the movement of the valve.

If operation is not as specified, replace the valve.

INSTALLATION




1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE
a. Install the bolt, oil control valve and O-ring.

Torque: 7.5 N.m (76 kgf.cm, 66 in.lbf)

b. Connect the oil control valve connector.




2. INSTALL AIR CLEANER ASSEMBLY