Crankshaft, Engine

Thrust clearance
STD 0.020 - 0.220 mm (0.0008 - 0.0087 inch)
Maximum 0.30 mm (0.0118 inch)
Thrust washer thickness 2.440 - 2.490 mm (0.0961 - 0.0980 inch)
Main journal oil clearance
No. 1
STD 0.020 - 0.038 mm (0.0008 - 0.0015 inch)
U/S 0.25 0.019 - 0.059 mm (0.0007 - 0.0023 inch)
Others
STD 0.024 - 0.042 mm (0.0009 - 0.0017 inch)
U/S 0.25 0.023 - 0.063 mm (0.0009 - 0.0025 inch)
Maximum 0.08 mm (0.0031 inch)
Main journal diameter
STD 63.985 - 64.000 mm (2.5191 - 2.5197 inch)
U/S 0.25 63.745 - 63.755 mm (2.5096 - 2.5100 inch)
Crank pin diameter
STD 54.987 - 55.000 mm (2.1648 - 2.1654 inch)
U/S 0.25 54.745 - 54.755 mm (2.1553 - 2.1557 inch)
Circle runout
Maximum 0.06 mm (0.0024 inch)
Main journal taper and out-of-round
Maximum 0.02 mm (0.0008 inch)
Crank pin taper and out-of-round
Maximum 0.02 mm (0.0008 inch)
Crankshaft pulley x Crankshaft 295 Nm (2,950 kgf-cm, 217 ft. lbs.)
Drive plate x Crankshaft 83 Nm (850 kgf-cm, 61 ft. lbs.)
Flywheel x Crankshaft 85 Nm (840 kgf-cm, 63 ft. lbs.)