Installation

SEAT: LUMBAR SUPPORT ADJUSTER ASSEMBLY: INSTALLATION

1. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

(a) Install the separate type front seatback assembly with the 4 bolts.





Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

2. INSTALL FRONT SEAT WIRE Reassembly

3. INSTALL NO. 1 FRONT SEAT CUSHION PROTECTOR Reassembly

4. INSTALL NO. 2 FRONT SEAT CUSHION PROTECTOR Reassembly

5. INSTALL FRONT SEAT LOWER CUSHION SHIELD RH (for Power Seat) Reassembly

6. INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (for Power Seat) Reassembly

7. INSTALL RECLINING ADJUSTER INSIDE COVER RH Reassembly

8. INSTALL RECLINING ADJUSTER INSIDE COVER LH Reassembly

9. INSTALL FRONT SEATBACK COVER WITH PAD Reassembly

10. INSTALL FRONT SEAT CUSHION COVER WITH PAD Reassembly

11. INSTALL FRONT SEAT CUSHION INNER SHIELD Reassembly

12. INSTALL FRONT SEAT INNER BELT ASSEMBLY Installation

13. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY Reassembly

14. INSTALL VERTICAL ADJUSTING HANDLE Reassembly

15. INSTALL RECLINING ADJUSTER RELEASE HANDLE Reassembly

16. INSTALL FRONT SEAT ASSEMBLY Installation

17. INSTALL INNER SEAT TRACK COVER Installation

18. INSTALL OUTER SEAT TRACK COVER Installation

19. INSTALL FRONT SEAT HEADREST ASSEMBLY Installation

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

21. INSTALL REAR NO. 3 FLOOR BOARD Installation

22. INSTALL REAR DECK FLOOR BOX Installation

23. INSTALL REAR NO. 2 FLOOR BOARD Installation

24. INSPECT FRONT SEAT ASSEMBLY Installation

25. INSPECT SRS WARNING LIGHT

Diagnosis System