Installation

SEAT: FRONT SEAT CUSHION HEATER: INSTALLATION

1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

(a) Using hog ring pliers, install 11 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.
(b) Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 2 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.
2. INSTALL FRONT SEAT CUSHION COVER WITH PAD Reassembly

3. INSTALL FRONT SEAT CUSHION INNER SHIELD Reassembly

4. INSTALL FRONT SEAT INNER BELT ASSEMBLY Installation

5. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY Reassembly

6. INSTALL VERTICAL ADJUSTING HANDLE Reassembly

7. INSTALL RECLINING ADJUSTER RELEASE HANDLE Reassembly

8. INSTALL FRONT SEAT ASSEMBLY Installation

9. INSTALL INNER SEAT TRACK COVER Installation

10. INSTALL OUTER SEAT TRACK COVER Installation

11. INSTALL FRONT SEAT HEADREST ASSEMBLY Installation

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

13. INSTALL REAR NO. 3 FLOOR BOARD Installation

14. INSTALL REAR DECK FLOOR BOX Installation

15. INSTALL REAR NO. 2 FLOOR BOARD Installation

16. INSPECT FRONT SEAT ASSEMBLY Installation

17. INSPECT SRS WARNING LIGHT

Diagnosis System