Installation

HYBRID / BATTERY CONTROL: HV RELAY ASSEMBLY: INSTALLATION

1. INSTALL HYBRID BATTERY JUNCTION BLOCK

CAUTION:
Be sure to wear insulated gloves.

(a) Install the hybrid battery junction block with the 3 nuts.





Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(b) Connect the 2 connectors to the hybrid battery junction block.





NOTICE:
The connectors should be connected securely.

(c) Connect the 2 connectors to the hybrid battery junction block.





2. CONNECT FRAME WIRE Installation

3. CHECK HIGH VOLTAGE CABLE CONNECTION Installation

4. INSTALL UPPER HYBRID BATTERY COVER SUB-ASSEMBLY

HINT
Installation.