How To Proceed With Troubleshooting
DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING
HINT
* Use the procedure to troubleshoot the power door lock control system.
* *: Use Techstream.
1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
NEXT -- Continue to next step.
3. PROBLEM SYMPTOMS TABLE
B -- Go to step 5
A -- Continue to next step.
4. OVERALL ANALYSIS AND TROUBLESHOOTING*
(a) Operation Check Operation Check.
(b) Terminals of ECU Power Door Lock Control System.
(c) DATA LIST / ACTIVE TEST Power Door Lock Control System.
NEXT -- Continue to next step.
5. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.
6. CONFIRMATION TEST
NEXT -- END