Installation
INTERIOR: FUEL LID LOCK CONTROL: INSTALLATION
1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER
(a) Install the lock retainer and turn it counterclockwise as shown in the illustration.
2. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
(a) Install the cable and turn it clockwise as shown in the illustration.
(b) Install the fuel lid lock open lever with the bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(c) Install the cable to the clamps and tape as shown in the illustration.
3. INSTALL FRONT FLOOR CARPET ASSEMBLY
(a) Install the front floor carpet.
4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (w/ Rear No. 2 Seat) Installation
5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (w/o Rear No. 2 Seat) Installation
6. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (w/ Rear No. 2 Seat) Installation
7. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (w/o Rear No. 2 Seat) Installation
8. INSTALL TETHER ANCHOR BRACKET SUB-ASSEMBLY (w/o Rear No. 2 Seat) Installation
9. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL LH (w/o Rear No. 2 Seat) Installation
10. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL RH (w/o Rear No. 2 Seat) Installation
11. INSTALL REAR DECK TRIM COVER LH (w/ Rear No. 2 Seat) Installation
12. INSTALL REAR DECK TRIM COVER RH (w/ Rear No. 2 Seat) Installation
13. INSTALL REAR FLOOR FINISH PLATE Installation
14. INSTALL BACK DOOR WEATHERSTRIP Installation
15. INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE Installation
16. INSTALL REAR FLOOR NO. 2 BOARD Installation
17. INSTALL REAR FLOOR NO. 3 BOARD Installation
18. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (w/ Rear No. 2 Seat)
(a) Install the rear No. 2 seat Installation.
19. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (w/ Rear No. 2 Seat)
(a) Install the rear No. 2 seat Installation.
20. INSTALL DECK BOARD ASSEMBLY (w/o Rear No. 2 Seat) Installation
21. INSTALL REAR FLOOR NO. 1 BOARD (w/o Rear No. 2 Seat) Installation
22. INSTALL TONNEAU COVER ASSEMBLY (w/o Rear No. 2 Seat) Installation
23. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/o Rear No. 2 Seat) Installation
24. INSTALL LOWER CENTER PILLAR GARNISH LH Installation
25. INSTALL LOWER CENTER PILLAR GARNISH RH Installation
26. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH Installation
27. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH Installation
28. INSTALL REAR DOOR SCUFF PLATE LH Installation
29. INSTALL REAR DOOR SCUFF PLATE RH Installation
30. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation
31. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation
32. INSTALL COWL SIDE TRIM BOARD LH Installation
33. INSTALL COWL SIDE TRIM BOARD RH Installation
34. INSTALL FRONT DOOR SCUFF PLATE LH Installation
35. INSTALL FRONT DOOR SCUFF PLATE RH Installation
36. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY Installation
37. INSTALL CONSOLE BOX CARPET Installation
38. INSTALL NO. 1 INSTRUMENT PANEL BRACKET COVER INNER LH Installation
39. INSTALL NO. 1 INSTRUMENT PANEL BRACKET COVER INNER RH Installation
40. INSTALL CONSOLE REAR END PANEL Installation
41. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY Installation
42. INSTALL CONSOLE CUP HOLDER BOX Installation
43. INSTALL SWITCH BASE Installation
44. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY Installation
45. INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH Installation
46. INSTALL NO. 1 CONSOLE UPPER PANEL GARNISH Installation
47. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation
48. INSTALL REAR NO. 1 SEAT ASSEMBLY LH
(a) Install the rear No. 1 seat Installation.
49. INSTALL REAR NO. 1 SEAT ASSEMBLY RH
(a) Install the rear No. 1 seat Installation.
50. INSTALL FRONT SEAT ASSEMBLY LH
(a) for Manual Seat:
Install the front seat assembly Installation.
(b) for Power Seat:
Install the front seat assembly Installation.
51. INSTALL FRONT SEAT ASSEMBLY RH
HINT
Use the same procedure described for the LH side.
52. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
53. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.