Installation

CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): INSTALLATION

1. INSTALL DCM (TELEMATICS TRANSCEIVER)

2. INSTALL NO. 1 DCM (TELEMATICS TRANSCEIVER) BRACKET

(a) Install the No. 1 DCM (telematics transceiver) bracket with the screw.

3. INSTALL NO. 2 DCM (TELEMATICS TRANSCEIVER) BRACKET

(a) Install the No. 2 DCM (telematics transceiver) bracket with the 3 screws.

4. INSTALL BACK-UP BATTERY

5. INSTALL NO. 3 DCM (TELEMATICS TRANSCEIVER) BRACKET Installation

6. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BACK-UP BATTERY

(a) Connect the 2 connectors.

(b) Install the DCM (telematics transceiver) with back-up battery with the 2 bolts.

(c) Connect the 2 connectors.

7. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation

8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

9. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET Installation

10. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Installation

11. INSTALL INSTRUMENT PANEL BOX ASSEMBLY Installation

12. INSTALL INTEGRATION CONTROL AND PANEL Installation

13. INSTALL CONSOLE BOX ASSEMBLY

Installation

14. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

15. INSTALL DECK FLOOR BOX RH Installation

16. INSTALL REAR DECK FLOOR BOX Installation

17. INSTALL NO. 1 DECK BOARD Installation

18. INSTALL NO. 2 DECK BOARD Installation

19. INSTALL DECK BOARD ASSEMBLY Installation

20. DCM ACTIVATION

HINT
When replacing the DCM (telematics transceiver), perform vehicle contract setting DCM Activation.