Installation

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER: INSTALLATION

1. PRECAUTION

NOTICE:
When removing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

2. INSTALL NAVIGATION COMPUTER SUB-ASSEMBLY

3. INSTALL HARD DISK DRIVE Installation

4. INSTALL NO. 1 RADIO RECEIVER BRACKET

(a) Install the No. 1 radio receiver bracket with the 4 screws.

5. INSTALL NO. 2 RADIO RECEIVER BRACKET

HINT
Use the same procedure as for the No. 1 radio receiver bracket.

6. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET

(a) Connect each connector.

(b) Engage the 2 guides and 5 claws.

(c) Install the navigation receiver assembly with bracket with the 4 bolts.

7. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Installation

8. INSTALL INSTRUMENT PANEL BOX ASSEMBLY Installation

9. INSTALL INTEGRATION CONTROL AND PANEL Installation

10. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

11. INSTALL DECK FLOOR BOX RH Installation

12. INSTALL REAR DECK FLOOR BOX Installation

13. INSTALL NO. 1 DECK BOARD Installation

14. INSTALL NO. 2 DECK BOARD Installation

15. INSTALL DECK BOARD ASSEMBLY Installation

16. INSPECT HARD DISK DRIVE

Operation Check