Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> Tacoma PreRunner V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Power and Ground Distribution >> Auxiliary Power Outlet >> Service and Repair >> Power Outlet Socket >> Removal

Removal





OTHER SYSTEM: POWER OUTLET SOCKET: REMOVAL

1. REMOVE FRONT FLOOR FOOTREST Removal

2. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab) Removal

3. REMOVE FRONT DOOR SCUFF PLATE LH (for Access Cab) Removal

4. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab) Removal

5. REMOVE COWL SIDE TRIM BOARD LH (for Regular Cab) Removal

6. REMOVE COWL SIDE TRIM BOARD LH (for Access Cab) Removal

7. REMOVE COWL SIDE TRIM BOARD LH (for Double Cab) Removal

8. REMOVE INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake) Removal

9. REMOVE INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake) Removal

10. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type) Removal

11. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission on Separate Seat Type) Removal

12. REMOVE REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type) Removal

13. REMOVE INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type) Removal

14. REMOVE FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type) Removal

15. REMOVE FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type) Removal

16. REMOVE FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type) Removal

17. REMOVE FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type) Removal

18. REMOVE AIR CONDITIONING CONTROL ASSEMBLY Removal

19. REMOVE RADIO RECEIVER ASSEMBLY Removal

20. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY Removal

21. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Disassembly

22. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Removal

23. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

24. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY Removal

25. REMOVE LOWER INSTRUMENT PANEL LH Removal

26. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY Removal

27. REMOVE POWER POINT SOCKET ASSEMBLY





(a) Turn the socket counterclockwise as shown in the illustration, disengage the claw between the socket and the power point socket cover, and push the socket out towards the room side.

(b) Align the socket with the notch on the power point socket cover, and remove the power point socket assembly on the room side.




pro multis · About Operation CHARM