Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

A/C System Cooling Performance, Checking




A/C System Cooling Performance, Checking


NOTE:
A/C evaporator temperature switch -E33- (if equipped) switches A/C compressor OFF only in special instances so evaporator does not ice up; variable displacement A/C compressor maintains temperature of 0 °C (32 °F) in evaporator.


Test conditions
- Condenser and radiator are clean and free of obstructions
- Air distribution can be adjusted properly with ventilation control knobs
- No wiring problems detected using wiring diagram
- Outside (ambient) temperature is 20 °C - 30 °C (68 °F - 86 °F)

Checking
- Start engine.
- Set fresh air blower to second speed (position 2).
- Set temperature control knob to full "cold" position (against stop).
- Adjust air distribution so air flows from instrument panel vents.
- Switch A/C on by pressing "A/C" button.
- Insert thermometer into center instrument panel outlet.
- Raise engine speed to 2000 RPM.

Specified result
With normal humidity and outside (ambient) temperature between 20 - 25 °C (68 - 77 °F), system is sufficiently charged if air temperature from center instrument panel vent drops below 10 °C (50 °F) within one minute.

For higher ambient temperatures and/or higher humidity, specified air temperature from center instrument panel vent can be slightly higher.