Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 1994 >> Eurovan L5-2459cc 2.5L SOHC >> Repair and Diagnosis >> Power and Ground Distribution >> Relay Box >> Service and Repair >> Multi-Pin Plug Behind Relay Plate, Removing and Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Multi-Pin Plug Behind Relay Plate, Removing and Installing




Multi-pin Plug Behind Relay Plate, Removing And Installing


NOTE: Multi-pin connector pin assignment


Removing Multi-pin Plug







- Pull the retaining slide -1- on rear of relay plate out of the housing -arrow- as far as possible (about 5 mm).







- Press retaining lug on multi-pin connector -arrow- and pull out of relay plate.







Installing multi-pin connector


NOTE: Insert connector so that the locking pin - 2- face towards locking slide -1-.


- Push multi-pin connector into appropriate location as far as stop with locking pin -2- located in recess -4- until retaining tab -3- engages.
- Push locking slide -1- against stop - arrow-; only possible when all multi-pin connectors are pushed in until the retaining tabs -3- are engaged.


pro multis · About Operation CHARM