Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2001 >> Eurovan V6-2.8L (AXK) >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Air Injection >> Pulsair Valve >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pulsair Valve: Service and Repair



Combination valve, removing and installing

Removing

Note:

- In the continuing work procedure the battery Ground (GND) strap must be disconnected. Therefore, determine whether a coded radio is installed. If necessary, determine anti-theft coding first.

- Remove cover at left above the battery.
- Switch ignition off and disconnect battery Ground (GND) strap.






- Remove engine cover -1-. To do so, remove 3 bolts (arrows).
- Disconnect pressure hose -2- at combination valve -1-.
- Disconnect vacuum hose at combination valve -1-.






- Remove bolts (arrows) at connecting piece -3- of combination valve -1-.

Installing

Installation is the reverse of removal.

Note:

- Replace seal between combination valve and connection piece.

- If DTC memory was erased, readiness code must be regenerated


pro multis · About Operation CHARM