Selectable Functions When Using VAG 1551/1552 or VAS 5051

List of selectable functions
01 - Check Transmission Control Module (TCM) version Connecting VAG 1551 Scan Tool (ST) and selecting functions. Scan Tool Connecting and Initial Checks
02 - Check DTC Memory.
04 - Initiate basic setting. Basic Setting (Function 04)
05 - Erase DTC Memory.
06 - End output
08 - Read measured value block. Reading

Further functions, which can be printed out by pressing the HELP key, need not be considered.

- After checking and completing a function VAG 1551 Scan Tool (ST) returns to following start position:

Indicated on display:


Rapid data transfer HELP
Select function XX