Wheel Alignment Sequence

Wheel Alignment Specifications

=> [ Front Axle ]

=> [ Rear Axle ]

=> [ Vehicle Alignment ]

Front Axle





* Camber is not adjustable. Only slight corrections are possible by moving the subframe. Adjustment range approximately 10' to 15'.





* Camber is not adjustable. Only slight corrections are possible by moving the subframe. Adjustment range approximately 10' to 15'.

Rear Axle









Vehicle Alignment

The following work sequence must be followed!

1 Check front axle camber and adjust if necessary => [ Front Axle Camber, Adjusting ] Front Axle Camber, Adjusting.
2 Check rear axle camber.

• Camber is not adjustable, notes => [ Rear Axle Camber, Adjusting ] Rear Axle Camber, Adjusting.

3 Check rear axle toe and adjust if necessary.

The rear axle toe is not adjustable, notes => [ Rear Axle Toe, Adjusting ] Rear Axle Toe, Adjusting.

4 Check front axle toe and adjust if necessary => [ Front Axle Toe, Adjusting ] Front Axle Toe, Adjusting.
5 Check which suspension is installed in the vehicle. This information can be found on the vehicle data sticker Vehicle Data Label.