Wheel Alignment Test Prerequisites

Wheel Alignment Test Prerequisites

• Check suspension, wheel bearing, steering and steering linkage for excessive play and damage

• Tread depth difference of no more than 2 mm on an axle

• Tires inflated to prescribed pressure

• Curb weight of vehicle

Fuel tank must be full

Spare tire and vehicle tools are installed in appropriate position in vehicle

The water container for the windshield/headlight cleaning system must be full.

• Be sure that the sliding plates and turn tables are not touching the end stop when checking wheel alignment

• Test equipment must be properly adjusted and attached to the vehicle (see equipment manufacturer's instructions)!

If necessary, contact the manufacturer for familiarization with the proper use of the equipment.

After a certain period, wheel alignment platforms and computer equipment can lose their original leveling setting and adjustments.

Wheel alignment platforms and wheel alignment analyzer/computer should be serviced and calibrated at least once a year.

- Precision equipment of this type should be treated with due care and knowledge.