Headlamp Alignment Control Module: Service and Repair

HID Headlamp

Headlamp Range Control Module

The Headlamp Range Control Module (J431) is installed in the left front wheel housing.

Removing

- Remove the left front wheel housing liner.

- Remove the screws - 1 - on the Headlamp Range Control Module (J431).





- Disconnect the connector - 2 - on the Headlamp Range Control Module (J431).

Installing

Install in reverse order of removal, noting the following:

- Make sure the headlamp is working correctly.

Coding the Headlamp Range Control Module (J431).

- Perform basic setting of headlamp, refer to => [ HID Headlamp, Basic Setting ] HID Headlamp, Basic Setting.