Radar Interior Monitoring Control Module 1 (G303)

Radar Interior Monitoring Control Module 1 (G303)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ((3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing:

- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Carefully remove trim - 1 -.





- Remove screws - 1 -, release retainers - arrows B - and remove interior light module from headliner opening - direction of arrow A -, considering length of available cable.





- Disconnect the connectors - 1 - and - 2 -.





- For vehicles with hands-free telephone equipment, unclip Telephone Microphone (R38) - arrow -.

- Remove front interior light.

- Remove the bolts - arrows A -, disengage retaining lugs - arrows B - and remove console from molded headliner in - direction of arrow C -.





- Disconnect connector - 2 - from Radar Interior Monitoring Control Module 1 - 1 -.





- Disengage Radar Interior Monitoring Control Module 1 - 1 - at retaining lug - arrow -.

- Release retainers at interior monitoring sensors and remove from headliner along with Radar Interior Monitoring Control Module 1.