Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2006 >> Passat Sedan 4Motion (3C2) V6-3.6L (BLV) >> Repair and Diagnosis >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> Fuse Holder
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuse Holder






Fuse Holder

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1410)

• Trim Removal Wedge (VAS 3409)

CAUTION!
When disconnecting and connecting battery, the procedure must be followed as described in the Repair Information. Refer to=> [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

• The Passat has two fuse panels located on the left and right side of the instrument panel.

• The following illustration depicts procedure for removing the left fuse panel. Work procedure for removing right fuse panel is the same.

Removing:

- Disconnect battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove side cover - 1 - of instrument panel, do this by inserting (VAS 3409) or a screwdriver into recess - 2 - and pry off cover - 1 - in - direction of arrow -.





- Remove screws - arrows - and guide fuse panel - 1 - out toward inside, considering length of available cable.





Installing:

Install in reverse order of removal, noting the following:

- Tighten the screws to tightening specification. Refer to => [ Fastener Tightening Specifications, Fuse Holder ] Fastener Tightening Specifications, Fuse Holder.
pro multis · About Operation CHARM