Steering Column Switch

Steering Column Switch

Steering Column Switch, Through 10.09

CAUTION!
When disconnecting and connecting battery, the procedure must be followed as described in the Repair Information. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

Removing:

Also, if only one individual component of steering column switch is removed or replaced, it must be performed in sequence as described in the following.

- Disconnect battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove steering wheel.

- Remove steering column trim.

Remove steering column switch assembly components in the following sequence:

• Steering Column Electronic Systems Control Module (J527). Refer to => [ Steering Column Electronic Systems Control Module, Through 10.09 ] Steering Column Electronic Systems Control Module (J527), Through 10.09

• Airbag Spiral Spring/Return Spring With Slip Ring (F138). Refer to => [ Airbag Spiral Spring/Return Spring With Slip Ring, Through 10.09 ] Airbag Spiral Spring/Return Spring With Slip Ring (F138), Through 10.09

• Segment sensor for steering angle sensor. Refer to => [ Steering Angle Sensor Segment Sensor, Through 10.09 ] Steering Angle Sensor Segment Sensor, Through 10.09

• Steering Column Combination Switch (E595). Refer to => [ Steering Column Combination Switch, Through 10.09 ] Steering Column Combination Switch (E595), Through 10.09

Installing:

Install in reverse order of removal.