Windshield Assembly Overview

Flush Bonded Windows

Windshield Assembly Overview





1 Windshield

• Windshield, removing and installing, refer to => [ Windshield ] Flush Bonded Windows

2 Window Adjuster

• 443,845,631 A

3 PUR Adhesive Sealant

• Bead diameter: width = 7 mm, height = 11 mm (including pre-coating, residual material on window glass and window flange)

• Minimum curing time, refer to => [ Minimum Curing Time ] Minimum Curing Time

4 Body Flange

• Paint damage repairing, refer to => [ Paint Damage, Repairing ] Paint Damage, Repairing

5 Retainer

• Is a part of the windshield

6 Electrical Connections

• Kapton wire for windshield heater

7 Plenum Chamber Cover

• Must only be pulled out of binding profile by hand.

• Remove plenum chamber cover, refer to => [ Plenum Chamber Cover ] Flush Bonded Windows.

8 Drip Rail

9 Height Dimension

• From top surface of window to upper edge of roof

• Set a constant dimension of 2.5 mm using (3371)

10 Gap Dimension

• From window edge to roof edge

• Set a constant dimension of 2.5 mm using (3371)

11 Electrical Connections

• Kapton wire for Ground (GND) connection

12 Communication Window

• Only with tinted glass

• There is no infrared reflecting coating in this area, it serves to fulfill function of electronic components installed as retail accessories.