Telephone Operating Electronics Control Module, Rabbit Sedan Through 05.06

Telephone

Telephone Operating Electronics Control Module, Rabbit Sedan through 05.06





• The telephone operating electronics control module is installed under the front right seat.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove right front seat.

- Remove screws - arrows -, disconnect connectors - A - and remove bracket with antenna selection control module.





- Unclip sill trim and fold carpet back.

- Fold both latches on plastic bracket in direction of - arrow - and remove telephone operating electronics control module.





- Release connector by pressing on catch spring - A - and swing bracket in direction of - arrow -.





- Release connector by pressing on catch spring - arrow - and remove connector.





Installing

Install in reverse order of removal.