Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2006 >> Touareg (7LA) V8-4.2L (AXQ) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Data Link Connector >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Data Link Connector: Testing and Inspection






Vehicle Tester, Connecting

• Follow the current operating instructions for the Vehicle Diagnosis, Testing And Information System, which can be displayed by selecting the "Administration" and "operator's handbook " buttons.

Special tools, testers and auxiliary items required

• Vehicle Tester

• Diagnostic Cable (VAS 5051/6A) (5 m)

• Diagnostic Cable (VAS 5051/5A) (3 m)

• For the diagnostic, only the diagnostic cables listed above are to be used since only these are equipped with CAN wires and permit a CAN diagnostic or CAN communication.

Connect the Vehicle Tester:

- Apply the parking brake.

- In vehicles with automatic transmissions, move the selector lever to the "P" or "N" position.

- In vehicles with manual transmissions, move the shift lever to the neutral position.

- With the ignition switched off, connect the Vehicle Tester with the Diagnostic Cable (VAS 5051/6A) to the data link connector in the vehicle - arrow -.





- Switch on ignition.

- Turn off all electrical consumers.

• /The connection of all other and the following diagnostic operation system or vehicle diagnosis and service system occurs in the previously described sequence.


pro multis · About Operation CHARM