Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Distribution Module: Service and Repair






Vehicle Electrical System Control Module

If control module is being replaced, first perform work procedure --> [ Vehicle Electrical System Control Module, Coding ] Programming and Relearning.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove lower storage compartment on driver side --> Body Interior 68 Removal and Installation.

The number of multi-pin harness connectors - 1 - at Vehicle Electrical System Control Module (J519) can deviate from the illustration depending on vehicle equipment.





- Release locking mechanisms of multi-pin harness connectors - arrows - and disconnect multi-pin harness connectors - 1 - from Vehicle Electrical System Control Module (J519) - 2 -.

- Remove Vehicle Electrical System Control Module (J519) - 2 - with wires connected to rear side out of bracket.

- Release locking mechanisms of multi-pin harness connectors - arrows - and disconnect multi-pin harness connectors - 1 - from Vehicle Electrical System Control Module - 2 -.





- Remove Vehicle Electrical System Control Module (J519) from vehicle.

Installing

Install in reverse order of removal.