Verification of Brake Circuit Warning Indicator Function

Verification of brake circuit warning indicator function





Verify

Verification

Hint: After repair, it is necessary to check that the symptom no longer exists.
Perform as follows:








- Ignition off.
- Reconnect connectors, components etc.
- Start engine.
- Rev engine up once.




Hint: The brake circuit warning indicator should not come on if the brake fluid level is correct.

- Remove the reservoir cap. Lift up the brake fluid sensor and let the float mechanism hang freely.
Note! Place rags under the brake fluid reservoir in to order avoid brake fluid spillage on painted surfaces.

Check that the brake circuit indicator comes on.

OK - VERIFIED

Not OK - VERIFICATION FAILED

------------------------

-------------------------------------------------