Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fault-Tracing Information






Fault-tracing information

Condition




- The fault is permanent.
- The control module must be correctly connected.
- Use the correct memory cassette for the Volvo Scan Tool (ST).

Possible source
- Low battery voltage.
- Open-circuit, short-circuit to ground or short-circuit to supply in the data link connector (DLC) cable.
- Open-circuit in data link connector (DLC) power supply, power ground or signal ground.
- Defective Volvo Scan Tool (ST), Volvo Scan Tool (ST) adapter or wiring.

Note! If the communication problem only occurs when the car is stationary with the ignition on or when the engine is being started (engine not running), connect a battery charger or extra battery.