Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Programming The ECC Control Module






Programming the ECC control module

Query




Connecting

Connecting the Volvo Scan Tool (ST)
The Volvo Scan Tool (ST) must be connected to the VIDA PC and data link connector (DLC) in the passenger compartment.





Is the Volvo Scan Tool (ST) connected and switched on?

Yes - FAULT FOUND

No - No Fault Found

------------------------

FAULT FOUND - Programming the ECC control module

No Fault Found - Connecting Volvo System Tester

-------------------------------------------------

Connecting Volvo System Tester




Connecting the Volvo Scan Tool (ST)

Connecting the Volvo Scan Tool (ST)




- Ignition off.
Insert the blue memory cassette in the Volvo Scan Tool (ST).
Connect adapter 951 1457 Adaptor 951 1457 Adaptor to the cable 951 1458 Scan tool cable 6 meters 951 1458 Scan Tool Cable 6 Meters.
Connect VIDA communication cable between adapter and VIDA PC.
Connect cable 951 1458 Scan tool cable 6 meters 951 1458 Scan Tool Cable 6 Meters from Volvo Scan Tool (ST) to the data link connector (DLC) in the passenger compartment.
Switch on the Volvo Scan Tool (ST) switch.





Continue - DONE

------------------------

DONE - Programming the ECC control module

-------------------------------------------------

Programming the ECC control module

FAULT FOUND - DONE

-------------------------------------------------